Gisborne

Gas to Electric Heating and Cooling Upgrades in Gisborne

Gisborne has a large number of homes from the 1990s and 2000s with gas ducted heating that is now near the end, and the Victorian Energy Upgrades program is built for exactly that situation. This page explains what a real whole-home conversion involves in a Gisborne home, including the ductwork question most quotes skip.

  • Gas heater removed and decommissioned to program requirements
  • New ducted reverse cycle system designed for the home's heat load and airflow
  • New ductwork and outlets where the existing ones are unsuitable, which is typical
  • Eligibility checked and the program paperwork handled as part of the job

Why the program fits Gisborne so well

Gisborne and New Gisborne grew fast through the 1990s and 2000s, and the houses from those years were almost all fitted out the same way: a gas ducted heater in the roof or outside, an evaporative cooler above it, and ductwork that was adequate for the heater and nothing more. Twenty-odd winters on, a lot of those heaters are on their last legs, and the Victorian Energy Upgrades program was written for exactly that situation. The gas heater comes out and is decommissioned, a ducted reverse cycle system goes in with new ductwork, and the household ends up with heating and cooling from one system with the program’s discount applied to the installation.

What the job looks like in a Gisborne home

The three kinds of Gisborne house we convert most often need three different designs. In the established streets on larger blocks, the job is a full conversion: heater out, cooler usually out, new ductwork and outlets throughout, because the ducts that served a gas heater are frequently too small, too poorly insulated after twenty years, and laid out for gas outlets rather than air conditioning. In the newer New Gisborne estates the heater is younger and the roof space tighter, and the conversion is planned around the space that is there. On the acreage towards Gisborne South and Bullengarook the question is zoning and sometimes a second system, so that a long house heats evenly rather than having a warm living room and cold bedrooms at the far end.

Every conversion we install is designed for a frosty Gisborne morning first. The heat load is calculated for the house as it is, including orientation, glazing, insulation and ceiling heights; the equipment is chosen for its heating capacity at low outdoor temperatures; the return air is sized properly; and zones and sensors follow how the household lives. Our guide on reusing gas heating ducts explains why new ductwork is part of every conversion rather than an optional extra.

The systems we install

We install ActronAir and Rinnai ducted systems, for which we are factory-trained dealers buying direct from the manufacturers, and we have substantial hands-on experience installing Mitsubishi Electric ducted systems. For a large zoned Gisborne home ActronAir is our premium recommendation because its variable-capacity inverter heats the rooms in use without running the whole house at full output on a cold night. We recommend one system for your house rather than list three.

When a full conversion is not the answer

Some Gisborne homes are better served by a Braemar Dominator direct replacement, particularly where the gas heater sits outside or under the floor and the ductwork is sound. Others only want to replace the heater and keep the cooler, in which case the Gisborne gas heater replacement page sets out a like-for-like heater. Households who want whole-home cooling regardless of the heating are covered on the Gisborne ducted air conditioning page. We install all of them, so the recommendation follows the house.

The program, briefly

The replaced gas heater must be decommissioned so it is permanently unusable and removed, and the work must be documented. Only accredited providers can apply the discount, and only approved equipment qualifies. VEU rebate administration for Macedon Ranges Gas & Air projects is processed under Melbourne Gas & Air, another trading name of the same legal entity; the accreditation details that apply to your job are shown in your written quote. We handle the decommissioning, the documentation and the discount as part of the installation. Eligibility rules and discount amounts change, so we confirm them for your home at quote time rather than publishing a figure here.

Local knowledge

What we see in Gisborne

A large stock of gas-heated homes from the 1990s and 2000s

Gisborne and New Gisborne grew strongly through the 1990s and 2000s, and most of those homes were built with a gas ducted heater. Many are now at the age where the heater is on its last legs, which is when a conversion makes the most sense: the money is being spent anyway, and the question is what it buys.

Heater and cooler due together

In the established streets the gas heater and the evaporative cooler are often the same age and both due. In a whole-home conversion the new ducted system heats and cools through its own ductwork, so the gas heater is removed and the cooler either stays or goes, depending on its condition and what you want, which settles both questions in one job.

Cold, frosty winters and warm, dry summers

Gisborne is a little lower and milder than Woodend and Kyneton but still gets cold, frosty winters. We size a conversion for the coldest mornings so the heating never falls short, and for the warm, dry summers so the cooling side is not an afterthought.

Acreage homes towards Gisborne South and Bullengarook

Larger homes on acreage towards Gisborne South and Bullengarook often need more than one zone, and sometimes more than one system, to heat and cool evenly. Zoning is designed around how the home is lived in rather than a default layout, and the outdoor unit position is chosen for access and noise on the block.

Gisborne, New Gisborne and Gisborne South

We regularly work throughout Gisborne, New Gisborne, Gisborne South and the surrounding areas, so the site visit is easy to arrange and the installation crew is local.

Why our installations perform

The MRGA Standard

What a properly designed and installed system includes, and what our quote is built around.

  • Sized for your home, not a rule of thumb

    We size heating and cooling from the home: floor area, ceiling heights, insulation, glazing, orientation and how the rooms are used. An oversized unit short-cycles and an undersized one runs flat out on the coldest and hottest days, which is exactly when you need it.

  • New, correctly insulated ductwork on every ducted reverse cycle installation

    Ducted systems live or die by the ducts. A new ducted reverse cycle installation gets new ductwork, sized for the system's airflow, insulated to the current standard, sealed at every joint and supported so it does not sag or kink in the roof. We do not reuse old gas-heating ductwork for a new ducted reverse cycle system. When a gas ducted heater is replaced like for like, the existing ducts can stay where we have inspected them and they are suitable.

  • Return air and outlets placed for even comfort

    Outlet positions, return-air size and location decide whether the back bedrooms are as comfortable as the living room. We design outlet placement and return air for the floor plan and confirm it with you before installation day.

  • Zoning and sensors where they help

    Zoning lets you heat or cool the rooms you are using. Where a system is zoned we set the zones around how the home is lived in, and place temperature sensors where they read the room rather than a hallway or a draught.

Factory-trained dealers

Trained by the manufacturers, buying direct

We are factory-trained dealers for ActronAir, Brivis and Rinnai and purchase equipment directly from these manufacturers.

We also install, service and repair all major heating and cooling brands, including Mitsubishi Electric.

Accountability

9Year Labour & Workmanship Warranty

It applies to the installation work our own team does. Equipment is covered by the manufacturer's warranty, repairs and servicing carry their own workmanship warranty, and pre-existing or reused components are not covered by the nine years.

Gas to Electric Whole-Home Upgrade in Gisborne: your questions

Is a Gisborne home built in the 1990s or 2000s eligible?

Age alone does not decide it. Eligibility depends on the program's current rules for the heater being replaced, the equipment going in and the provider doing the work, and we confirm it for your home at the site visit rather than on this page. What we can say is that the typical Gisborne conversion, a gas ducted heater from that era replaced by a new ducted reverse cycle system, is the situation the program was written for. The discount that applies to your job is set out in the written quote.

Our New Gisborne estate home already has a ducted system. Does VEU apply to us?

The gas to electric incentive applies to replacing a gas ducted heater. If your home was built with an electric ducted system, a different part of the program may or may not apply to upgrading it, and we tell you plainly at the assessment. Where the existing system is simply undersized or badly zoned, the better spend is often a design fix, which the Gisborne ducted page explains.

Can the new system run through the ducts the gas heater used?

No, and in Gisborne's 1990s and 2000s homes the ducts are usually the weakest part of the old system. Reverse cycle moves more air at a lower temperature than a gas heater, and ductwork that is undersized, poorly insulated or laid out for gas outlets strangles the new equipment. Every conversion we do includes new, correctly insulated ductwork and outlets, in the quote from the start.

What happens to the evaporative cooler on the roof?

In the established Gisborne streets the cooler is often the same age as the heater. The new ducted system cools through its own ducts, so many households remove the cooler in the same job and tidy the roof. Others keep a sound cooler for cheap dry-day cooling and use the reverse cycle mainly for heating. We inspect it and decide with you.

Will it heat a Gisborne home on a frosty morning?

Yes, when it is sized for that morning. We calculate the heat load for the house as it is and select equipment for its heating capacity at low outdoor temperatures, not a Melbourne average. On the larger homes towards Gisborne South and Bullengarook the zoning design matters as much as the capacity, and a big acreage home sometimes needs two systems rather than one stretched too far.

Get in touch

Request a written quote in Gisborne

Prefer to talk? Call 1300 369 400, Monday to Friday 8:00am to 5:30pm, Saturday 9:00am to 1:00pm.

Photos of the unit, model plates, fault lights, house plans or compliance documents (JPG, PNG, HEIC, WebP or PDF) all help us quote accurately.