Gisborne
Ducted Reverse Cycle Air Conditioning in Gisborne, New Gisborne and Gisborne South
Whole-home heating and cooling from one system, sized for Gisborne's frosty winters and warm summers, zoned for how your household lives, and installed by our own team ten minutes up the road from our Sunbury base.
- ActronAir and Rinnai ducted systems from factory-trained dealers who buy direct
- Zoning and sensor placement designed around the household and the floor plan
- Heat load, duct sizing and airflow engineered for frosty mornings and warm afternoons
- 9 year labour and workmanship warranty on every installation
Whole-home comfort, designed properly
Ducted reverse cycle is the system most Gisborne households end up wanting once they have lived with it: quiet, even heating through winter, cooling that works on humid days as well as dry ones, and a single controller with zones for the rooms you use. It is also the system where the quality of the design and installation makes the biggest difference. Two Gisborne homes with the same equipment can feel completely different depending on how the ductwork, return air, outlets, zoning and commissioning were done.
We design and install ducted reverse cycle across Gisborne, New Gisborne, Gisborne South and Bullengarook with our own team from the site visit to the hand-over. How we approach a premium ducted installation.
What decides whether a Gisborne system performs
- Heat load and sizing. The system has to be sized for the home’s actual heat load: floor area, ceiling heights, orientation, glazing, insulation and how many people live there. Undersized systems run flat out and never catch up on a frosty morning; oversized systems cycle and cost more than they should.
- Duct sizing and insulation. Reverse cycle moves a large volume of air at a moderate temperature. Ducts that are too small make the system noisy and starve the far rooms. Poorly insulated ducts lose the heating and cooling you paid for in the roof space.
- Return air. An undersized return is one of the most common faults we find, including in newer estate homes. It strains the fan, raises noise and cuts capacity.
- Outlet size and placement. Where the air enters a room decides whether the room feels comfortable or draughty.
- Zoning and sensor placement. Zones designed around the household, with temperature sensors where they read the rooms people use. On a large acreage home this is the difference between an even house and a hot living room with cold bedrooms.
- Outdoor unit position, condensate and electrical. Clearances, noise, drainage and a circuit sized for the load.
- Commissioning. Airflow balanced at every outlet, controls set up and explained.
This is the detail that experienced technicians know matters and that customers often only discover after a poor installation. It is where we spend our time.
Replacing gas heating
If you are replacing a gas ducted heater, the Victorian Energy Upgrades program may apply. Every conversion we do installs new, correctly insulated ductwork and outlets designed for the new system rather than reusing the gas heating ducts, for reasons we explain on the gas to electric page.
Ducted or multi-head?
Not every home can take ductwork, and not every household wants whole-home conditioning. A multi-head split system covers several rooms from one outdoor unit without ducts, which suits some extensions and studios on the larger Gisborne blocks. Our multi-head versus ducted comparison sets out the trade-offs honestly, and the site visit settles which suits your home.
The brands
We install ActronAir and Rinnai ducted systems, for which we are factory-trained dealers who purchase directly from the manufacturers, and we have substantial hands-on experience installing Mitsubishi Electric ducted systems. We service and repair ducted systems of all major brands across Gisborne.
Local knowledge
What we see in Gisborne
New Gisborne homes built with ducted systems
The newer estates around New Gisborne were commonly built with ducted systems from the start. The work there is often replacing a builder-grade system that was sized to a rule of thumb with one designed for the house, adding proper zoning, or fixing a return air that was never big enough.
Established homes converting from gas and evaporative
Gisborne's established homes on larger blocks often run a gas ducted heater and an evaporative cooler of the same age. A whole-home ducted conversion, usually under the VEU program, replaces both with one system, and it usually means new ductwork rather than the ducts that served the gas heater.
Acreage towards Gisborne South and Bullengarook
Larger homes on acreage need real zoning, sometimes more than one system, and an outdoor unit position chosen for access, noise and airflow on the block. These are the installations where design makes the most difference, and where a rule-of-thumb quote goes wrong most expensively.
Sized for the mountain's winters
Gisborne sits at the foot of Mount Macedon. It is a little milder than Woodend and Kyneton but still has cold, frosty winters, so we size on the heat load at the coldest mornings, choose equipment rated to deliver at those temperatures, and insulate ductwork properly so the heating you pay for is not lost in the roof.
On our daily run
Gisborne, New Gisborne and Gisborne South are ten minutes from our Sunbury base and on our daily run, so the site visit is easy to arrange and the installation crew is local.
Why our installations perform
The MRGA Standard
What a properly designed and installed system includes, and what our quote is built around.
Sized for your home, not a rule of thumb
We size heating and cooling from the home: floor area, ceiling heights, insulation, glazing, orientation and how the rooms are used. An oversized unit short-cycles and an undersized one runs flat out on the coldest and hottest days, which is exactly when you need it.
New, correctly insulated ductwork on every ducted reverse cycle installation
Ducted systems live or die by the ducts. A new ducted reverse cycle installation gets new ductwork, sized for the system's airflow, insulated to the current standard, sealed at every joint and supported so it does not sag or kink in the roof. We do not reuse old gas-heating ductwork for a new ducted reverse cycle system. When a gas ducted heater is replaced like for like, the existing ducts can stay where we have inspected them and they are suitable.
Return air and outlets placed for even comfort
Outlet positions, return-air size and location decide whether the back bedrooms are as comfortable as the living room. We design outlet placement and return air for the floor plan and confirm it with you before installation day.
Zoning and sensors where they help
Zoning lets you heat or cool the rooms you are using. Where a system is zoned we set the zones around how the home is lived in, and place temperature sensors where they read the room rather than a hallway or a draught.
Factory-trained dealers
Trained by the manufacturers, buying direct
We are factory-trained dealers for ActronAir, Brivis and Rinnai and purchase equipment directly from these manufacturers.
We also install, service and repair all major heating and cooling brands, including Mitsubishi Electric.
Accountability
9Year Labour & Workmanship Warranty
It applies to the installation work our own team does. Equipment is covered by the manufacturer's warranty, repairs and servicing carry their own workmanship warranty, and pre-existing or reused components are not covered by the nine years.
Ducted Reverse Cycle Air Conditioning in Gisborne: your questions
How much does ducted reverse cycle cost in Gisborne?
It depends on the size of the home, the number of zones, whether ductwork is new and which system suits. We give a fixed written quote after a site visit so the price is real, not a range from a website.
Does ducted reverse cycle work in Gisborne winters?
Yes. Modern reverse cycle systems heat efficiently well below freezing, and we size them for Gisborne's frosty mornings rather than a Melbourne average. Correct sizing and a duct system that can carry the airflow are what make the difference on a cold July morning.
Can a ducted system replace both my gas heater and my evaporative cooler?
Yes. That is the most common whole-home conversion we do in Gisborne's established streets, often with support from the Victorian Energy Upgrades program. The new system heats and cools through its own new ductwork. The gas heater is removed, and the evaporative cooler can stay or be removed depending on its condition and what you want; we advise after inspecting it.
My New Gisborne home already has ducted. Can it be improved rather than replaced?
Often. Adding zoning, resizing the return air, rebalancing outlets or replacing an undersized unit can transform a system that was installed to a builder's specification. We assess what is there at the site visit and quote the fix that makes sense rather than a new system by default.
Which brand is best?
It depends on the home, the zoning you want and the budget. We install ActronAir and Rinnai as our primary ducted brands and have substantial experience with Mitsubishi Electric, and we recommend one system for your home rather than a list.
Get in touch
Request a written quote in Gisborne
Prefer to talk? Call 1300 369 400, monday to friday 8:00am to 5:00pm, Saturday 9:00am to 1:00pm.